3.7V Lipo Battery 180mAh - Micro Drone Battery

 

LiPo Batteries consist of 3.7V cells. 3.7V Lipo Battery has 1 3.7v cell. This allows you to monitor and charge individual cells. This is called 'Balance Charging' and it extends the life of your battery.

 

Your LiPo battery Lipo Level Meter and Alarm Module We recommend that you use it. This device can monitor each cell in your battery and sound an alarm when the battery gets too low. This is important for maintaining your battery. If you allow the voltage of your battery to be low, the battery may be permanently damaged and become unusable.

 

You must use special chargers to charge it. must. Using different devices will damage your lipo battery and can be dangerous. For 3.7V batteries You can use the A100 1S Compact Charger.

 

Things to Consider When Using Lipo Batteries

• End cables of Lipo batteries They should NEVER touch each other. Short circuits should not be made.
• For efficient operation of Lipo batteries, it is necessary to pay attention to the range of 3.00V - 4.20V per cell.
• If any cell of the battery you use falls below 3V, there is a risk of the battery ending its life.
• Overcharging, that is, charging more than 4.20V, also has safety risks.
• It should not be discharged below 3V. Considering that the capacity will decrease as the battery ages, the battery should be discharged following the 80% rule. In other words, it should be discharged as much as the value obtained when 80% of the Capacity value is calculated. If this rule is not followed, batteries may swell and explode.
• LiPo batteries should not be opened and should not be allowed to come into contact with water.
• They should only be charged with lipo battery chargers. Charging with the wrong charger will cause the battery to swell and is dangerous.