9.6V 1500mAH 20C Airsoft Lipo Battery - Cylinder Type - 2s Lipo Battery

 

Lipo batteries can be used with upgraded or high-end airsoft guns and significantly increase the performance of the airsoft gun These are high discharge batteries designed for

 

The LiPo battery has a charge control connector and a Tamiya connection connector.

 

Your LiPo battery Lipo Level Meter and Alarm Module We recommend that you use it with . This device can monitor each cell in your battery and sound an alarm when the battery gets too low. This is important for maintaining your battery. If you allow your battery voltage to become low, the battery may be permanently damaged and become unusable.

 

Battery Connection

 

To charge the Lipo batteries, you need to use special chargers. Using different devices will damage your lipo battery and can be dangerous. For 7.4V Lipo batteries A3 Compact Lipo (2-3S) Charger.

 

Things to Consider When Using Lipo Battery

• The end cables of Lipo batteries should NEVER touch each other. Short circuits should not be made.
• In order for Lipo batteries to work efficiently, it is necessary to pay attention to the range of 3.00V - 4.20V per cell.
• If any cell of the battery you use falls below 3V, there is a risk of the battery ending its life. .
• Overcharging, that is, charging more than 4.20V, also has safety risks.
• A LiPo battery should not be discharged below 3V. Considering that the capacity will decrease as the battery ages, the battery should be discharged following the 80% rule. In other words, the LiPo battery should be discharged to the value obtained when 80% of the capacity value is calculated. If this rule is not followed, batteries may swell and explode.
• LiPo batteries should not be opened and LiPo batteries should not be allowed to come into contact with water.
• Lipo batteries should only be charged with lipo battery chargers. Charging with the wrong charger will cause the battery to swell and is dangerous.