Esun eFlex 1.75mm (TPU-87A) Natural Filament
eFlex, high flexibility and very high mechanical strength (bending tensile resistance), wear resistance It is a clear, soft elastic PLA filament. It is also very good at chemical resistance, water resistance, oil and solvent resistance.
eFlex also has waterproof, cold-proof and anti-ultraviolet properties. EFlex filament is very flexible and elastic, with a Shore A Hardness of 87.
Note that the flexible filament is soft. No matter what vendor, you need to take special steps to ensure flexible materials print properly. Compatible with all FDM printers such as Forge and all FDM 3D Printers. If you are going to use this product, please check that your printer is compatible with flexible filaments.
Features:
Filament Weight: 1Kg
Density (g / cm³) 1.12
Melt Flow Index (g / 10min): 5 (10min, 2.16kg)
Shock Resistance (KJ / m²): 7 KJ / m²
Dimensional Accuracy (mm): 170 ± 0.1
Round Accuracy (mm): +/ - 0.5
Melting Point (° C): 210 - 230 ° C
TPU rubber based.
It is very flexible and elastic.Shore A Hardness is 87A.Tensile Strength is 52 MPa.