GT2 Pulley 20 Teeth 5mm

GT2 Pulley, 20 Teeth 5mm

This pulley that you can use in your 3D printer projects has 20 teeth. The teeth are in a structure that prevents the belts from slipping. You can connect it to the shaft with 2 setscrews.

The lower number of teeth on the pulleys will increase the sensitivity, but will reduce the movement speed.

• Inner diameter: 5 mm
• Outer diameter: 16 mm
• Height: 16 mm
• Thread number: 20
• Maximum band width: 7 mm
• Number of fixing screws: 2