NTC Sensor 100K Ohm 1 Meter Thermistor
Thermistor is the most used temperature sensor in 3D printers. In most 3D printers, the tip temperature is detected with a thermistor, and usually the heater plate temperature is detected with a second thermistor.
This 100K NTC sensor / Thermistor is in your 3D printers. you can use There is an xh2.54 terminal socket on the output part of the cable.
Technical Specifications
- 3D printer thermistors, temperature sensors
- Impedance: 100KΩ
- Accuracy: ± 1%
- Sensor Size: 3x15mm
- Temperature Range: -50 / 300V
- >Length: 1 M
- Thermistor head diameter: 3mm
What is a Thermistor?
Thermistors are resistors that change resistance with temperature changes. The good qualities of thermistors are a predictable, accurately known resistance value at every temperature within the operating range. The step down or rise depends on the type of thermistor per degree Kelvin (or Celsius if you prefer), this is called the coefficient. Positive thermal coefficient (PTC) will increase in resistance with an increase in temperature, negative ones (NTC) will decrease.
.png)
