AVEC 3A Mini and Micro Drone Motor Driver ESC

 

AVEC 3A ESC is a product suitable for use with micro drone motors. It can be used in drone construction projects by using it together with small drone motors such as 720, 8520.

You can easily operate your mini or micro motors with AVEC 3A ESC. It is designed to provide continuous 3A current. It is protected against heating and can be used safely. There are two pieces, 1 PWM/signal cable, and 2 power cables for motor connection, to which you can quickly connect your 1S or 2S Lipo batteries. Simply make a reverse connection to the ESC motor output cables.

On your flight control cards, you can also connect the PWM/signal cable to the PWM/signal pins of your card. To do this, simply connect the appropriate connector to the cable.

You do not need to install any program to use AVEC 3A ESCs, it is plug and play.

Make sure to choose your order quantity according to the number of motors you will use, because one ESC supports one motor.

PLEASE NOTE! Do not force the cables to be pulled when opening the cable ends. Use a pair of pliers or a tip opening tool. Our company is not responsible for any damage that may occur.