It is a multi-function touch sensing which is an integrated circuit module designed for touch interface module. This module can be used to replace mechanical light touch buttons to achieve touch switch control and brightness adjustment of LED lights. The design circuit of the module is protected from ambient temperature, moisture, surface debris, etc. It can automatically overcome any interference caused by the device and prevent significant differences due to resistance and capacitance errors. The input voltage cannot be lower than 5V or higher than 24V, the ideal use is 12V.
Operating Modes:
The default Mode is 1. Pads 1 2 3 are not soldered. OPT1 OPT2 OPT3 status was: 1 1 1. You can determine other modes as Solderless:1 Soldered:0 according to the table below.
Technical Specifications:
.png)
