HJ-2515 Desoldering Wire 2.5 mm - 1.5 Meters
Solder wick consists of copper threads woven together. It allows the solder to flow to the wick where it should not be. For this reason, solder wick is sometimes called desoldering wire/soldering cleaning wire. It is generally used to remove excess solder and remove a soldered component.
Usage:
- Place the wire over the solder you want to remove. and then push the heated tip of the soldering iron onto the wire.
- After absorbing the solder, remove the wire
- Cut off the used part of the wire with pliers
Technical Specifications
- Thin and soft wire has efficient heat transfer
- Removes solder quickly and with a good thermal response
- Length: 1.5m
- Width: 2.5mm
- Purpose of Use: repair and desoldering
.png)
