RosBot V1.4 Engine Driver / Development Board
RosBot is a board based on the Scratch3.0 design. Based on the UNO motherboard, it has 2 dual H-bridge motor drivers onboard. Can be used with Raspberry Pi 2, Raspberry Pi 3B+ and Intel UP Board single board computer. Supports 13 sensors or 10 servo motors, 4 DC motors or 2 stepper motors at the same time.
Features:
- 5-12vDC input
- 5v 3a output
- Chip: Atmega328p
- Dimension: 65mm*58mm*13mm
- PCB Thickness: 1.6 mm
- Mounting hole diameter: 3.7 mm
.png)
