915 MHz Pixhawk compatible telemetry set. It allows you to establish a telemetry connection between your drone and your computer. It can be directly plugged into the telemetry connection slot on Pixhawk cards.
Firmware updates and configuration are fully supported in ArduPilot APM Mission Planner. Configuration is also possible with the 3DR Radio configurator and AT commands.
Features:
- Transmitter power: 1000mw
- transmitter range: 5000m (Max. when no interceptor)
- transmitter frequency: 915Mhz
Baud rate: 57600 (default)
- Operating Temperature: -10-60 dgree
- Operating Humidity: 10% RH - 90% RH (non-condensing)
- Size (no antenna):
- Ground Module: 63mm (L) × 41mm (W) × 15mm (H)
- Air Module: 49mm (L) × 25mm (W) × 13mm (H)
- Weight (with antenna)
- Ground Module: 44g
- Air Module: 22.5g
Power Requirement of Ground Module
- VBAT: 3.7V (LiPo)
- Battery Capacity: 800mAh
- USB Charging Voltage: 4.5 ~ 5.5V
- Charging Current: 500mA
- Working Current: 100mA
- Standby Current: 12mA
- Working Hours: 7s (Full Power)
Power Requirements of Air Module
- Operating Voltage: 3.7V ~ 6V DC
- Emission Current: 100mA @ 30 dBm
- Current Receiving: 25mA
- PIN code: 0008
.png)
