CC1101 Wireless Module
CC1101 external wireless antenna module is suitable for Arduino projects and other microprocessor projects.
1.2K baud CC1101 module consists of a domestic R&Lotes unit to improve the effective communication distance. It allows one to adjust the rate of bits for different uses, resulting in a higher transmission rate. 2-Supports FSK, GFSK and MSK modulations. It also has a high sensitivity (1.2kbps @ -110 dBm, 1% data error rate).
Includes CRC error detection system and has low power consumption.
DIV>
Specifications:
- Power supply: 1.8-3.6 VDC
- Operating frequency: 387-464 MHz
- Low consumption current (RX mode, 15.6mA, 2.4Kbps, 433MHz)
- Minimum operating speed: 1.2 kbps
- Minimum operating speed: 500 kbps
- Minimum operating speed: 500 kbps
- LI>
- Improving the power phase noise of the adjacent channel, better and closer (ACP) performance
- Higher input saturation level
- Highest power performance
- Allows you to set the bit rate for different uses with a higher transmission rate
- Supports Modulation 2-FSK, GFSK, MSK
- CRC error detection and control of communication direction
- Programmable output power for all frequencies, up to +10dBm
- Wireless function wakes up
- Supports function activated by low power electromagnetic waves
- Automatic before transmission Supports CCA cleaning
- Operator monitoring system
- Fast frequency change synthesizer for accurate frequency hopping system
- High sensitivity (1.2Kbps@-110dBm, 1% error)< /LI>
- Wide continuous frequency band: CC1101: 387-464 MHz and 779-928 MHz
- Individual data 64 bytes RX and TX FIFO
- Size: 50 × 27x9 mm