JKBLD300 300W Brushless Brushless BLDC Motor Driver - 1

JKBLD300 300W Brushless Brushless BLDC Motor Driver - 2

JKBLD300 300W Brushless Brushless BLDC Motor Driver - 3

Keskinler

JKBLD300 300W Brushless Brushless BLDC Motor Driver

Name: JKBLD300 300W Brushless Brushless BLDC Motor Driver
Brand: Keskinler
SKU: MSK.DCM.01.000061
Price: 3974.40 TRY
Availability: InStock

Ratings & Reviews (0)

Comment

Show More: Dc Motor Drivers

Brand: Keskinler

Product Code: MSK.DCM.01.000061

Stokta son 10 ürün

3,312.00 TL + VAT

VAT Included: 3,974.40 TL

Adet

Recommend It Comment Price Alert

JKBLD300 300W Brushless Brushless BLDC Motor Driver

JKBLD300 300W Brushless Brushless BLDC Motor Driver is a 300W Brushless DC Motor Driver that can drive a 3-phase Brushless DC Motor with Ingenium Drives, Hall Effect Sensors in a closed loop configuration.

300W Brushless DC Motor Driver is a PLC to the driver It can be controlled in two different ways: with an external controller that provides signals such as and SCM, or with the help of an internal potentiometer to control the speed of the BLDC Motor. At the same time, the drive has large starting torque, fast starting and braking, and positive and negative switching, which is a combination of manual and automatic control.

Application areas are generally industrial machines and autonomous robots.

Features

Supply Voltage: 18-50VDC
Output Current: 15-35A
Available Engine Speed: 0 - 20000 RPM
Hall Sensor Voltage: 4.5 - 5V DC
Potentiometer: 10k ohm

Drive Parameters	Minimum Value	Recommended Value	Maximum Value	Unit
Output Current	0	15	35	A
Supply Voltage	18	48	50	VDC
Hall drive current	-	20	-	mA
Hall signal voltage	4.5	5	5.5	V
Applicable engine speed	0	-	20000	RPM

Environmental Factors	Environmental indexes
Things to avoid	Dust, oil stains and corrosive gas
Operating Temperature Range	10℃~+50℃
Humidity	40-90%RH (no condensation)
Vibration	5.9m/s2 Max
Standby Temperature Range	-20℃~+125℃
Cooling	Natural Cooling

Drive Interface and Pinout

JKBLD300-pinout

Signal	Terminal	Function
Login	SV	1.External potentiometer; 2. Analog signal input; 3.PWM pulse width.
	COM	Common port (0V reference level)
	F/R	High level input motor will rotate clockwise, low level input or F/R and COM connected motor will rotate counterclockwise
	EN	High level input motor stops slowly, low level input or when EN and COM are connected motor starts
	BRK	The motor brake stops when a high level is added or the port is suspended; motor starts when low level is added or EN and BRK are connected
Exit	BUY	The fault output signal of the motor or driver is 5V under normal conditions; When a fault occurs, the level is 0V.
Exit	SPEED	Speed output is the pulse frequency corresponding to the operation of the motor. The terminal can be connected to the upper computer.

Four speed regulation modes

Built-in potentiometer RV

Turn the RV buttons clockwise until a "click" sound is heard. turn; the engine starts to work. Turn the RV knobs clockwise and the engine will accelerate. Turn the RV knobs counterclockwise, the engine speed will decrease and the engine will stop until a "click" sound is heard.

Build-in%20potentiometer-RV.

External potentiometer

Use a suitable potentiometer with a resistance value of 10KΩ, connect the middle terminal to the SV terminal, and connect the other two terminals to the REF+ terminal and COM terminal respectively.

External-potentiometer