SP Racing F3 Flight Control Card Acro - Cleanflight
SP Racing F3 Flight Controller ARCO offers excellent flight performance based on tried and tested sensors, while a new generation CPU
Next-generation STM32 with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core Starting with the F3 processor, this flight controller has a lot of great features. There is a barometer mounted on the bottom of the panel for easy wind sealing, as well as additional internal sensors for altitude and bearing. It uses flight control (FC) software. You can contribute to the system thanks to its open source nature. Cleanflight has a detailed guide reviewed and maintained by Cleanflight developers and community.
You can access it here.
Pin Details:
4 x 4pin JST-SH sockets (I2C, SWD, 2xUART)
2 x 8pin JST-SH sockets (PPM, PWM, SERIAL RX , GPIO, ADC, 3V, 5V, GND)
8 x 3pin - holes for pin headers for ESC/Servo connections
2 x 4pin through holes for pin headers for 2x serial ports
2 x 2 pin through holes for pin headers for battery voltage and buzzer.
Features:
- Professional - Symmetrical, Neat and Tidy.
- 8 Dedicated PWM outputs
- 8 PWM Inputs
- 36 I/O Connections
- 72MHz Clock Speed
- 3 Hardware Serial Ports
- 64 Mb Flash Storage
No-compromise I/O
Use all features all the time; For example. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors – all at once!
Configurable
SPRacingF3, It runs Cleanflight, which can be configured to meet your needs using a cross-platform GUI (Windows / OSX / Linux).
Next Generation Processor
SPRacingF3, It features an ARM Cortex-M4 72MHz CPU with Math co-processor (FPU) for efficient flight calculations that do more in less time.
Cycling is up to ~2x faster than previous generation STM32F1-based boards.
Wide RC receiver Support
Supports SBus, SumH, SumD, Spektrum1024 / 2048, XBus, PPM, PWM receivers. No external inverter required (built-in).
Programmable led
Special output for programmable LEDs - ideal for steering, racing and night flying.
Battery Monitoring
Battery monitoring ports for voltage and current.
Features:
- STM32F3 CPU, MPU 6500 sensor, 16M high-capacity flash memory
- SP F3 runs Cleanflight, which can be configured to your needs using cross-platform GUI (Windows / OSX / Linux) .
- Small and lightweight, the Racing F3 features a standard 36x36mm form factor with 30.5mm mounting holes and weighs just 6 grams.
- Flight Log, built-in high capacity black box flight log recorder - optimize your settings and see the results of your setup without the guesswork.
- OneShot ESC, full support for OneShot ESCs for easy PID tuning and clearer response.
- Large RC receiver, SBus, SumH Supports SumD, Spektrum1024/2048,
- Battery Monitoring, battery monitoring ports for voltage and current.
- Sonar support for precise low altitude hold.
- I2C port always strong, for external sensors or Perfect for always-on OLED Display.
Package Content:
1 x SP Racing F3 Flight Controller.
2 x 8Pin Cable
2 x 4Pin Cable.
3 x Pin Header Set
2 x 2Pin Cable
.png)
